Crawler Crane with X-Leg-manufacture,factory,supplier from China

Introduction:Safety is a top priority, with advanced features such as:Interlocking between upper and lower vehicle sectionsExtreme position protectionSoft leg protectionTilt alarmWeight detection systemWind speed sensor protectionOutrigger length protectionTwo-way hydraulic balancing valveFor enhanced usability, the vehicle comes with four oversized steel toolboxes and steel anti-slip walkway plates, providing both convenience and safety for operators.

Introduction:CategorySpecificationChassisShaanxi AutomobileTotal Mass25,000 kgEngineYCS06270-60 Yuchai (270 HP)TransmissionFast 9JS119TAWheelbase4750 mm + 1300 mmOutline Dimensions11,000 mm x 2550 mm x 3980 mmTires11.00R20/18PR Steel wire tiresBrakesAir brake (when driving)Other FeaturesAir conditioning, power windows, central lockingMaximum Operating Height60 metersMaximum Working Range29/26/23/20 meters (at different loads)Rated Load of Platform100 kg, 200 kg, 300 kg, 400 kg (depending on configuration)Boom Slewing Angle360°Platform Dimensions3200 mm x 1000 mm x 1100 mm (with small load-bear

Introduction:Adopting WISCO BS700 high-strength and high-toughness manganese steel plate, modeling with U-shape 9.5 meters × 5 sectionsDouble hooks and double winches, hydraulic winches for construction vehiclesMeja putar 1,6 m dengan gearbox planetary besar dan struktur slewing berpemandu radio pusat.High-strength composite leg box steel using 70 manganese steel, do the side H-type double-section leg shape with the rear legs, 4 sides attached plate.Steering is hydraulically assisted and brakes are air breaksAdopting three pumps to combine flow Adopting multi-way valve single linkage, extracto

Introduction:It is made of high-strength and high-toughness manganese steel BS700 plate, and styled with a 7.2-meter by 5-section U-shaped veneer jib.Double hooks and double winches, hydraulic winches for construction vehicles1.3m turntable, medium planetary gearbox, center radio-guided slewing structure.High-strength composite leg box steel using 70 manganese steel, do the side H-type double-section leg shape with the rear legs, 4 sides attached plate.Steering is hydraulically assisted and brakes are air breaks.Adopting double pump merging Adopting multi-way valve single linkage, extractor ta

Introduction：The vehicle boasts a 7-section boom with 6 synchronized telescopic sections, providing exceptional reach and flexibility. A standout feature is the redundant wire rope system, which ensures safe operation even if the primary wire rope fails. The 360° infinite rotation platform offers a generous workspace of 1600mm x 700mm x 1100mm, complete with a small platform for carrying tools and materials.

Introduction:The 7-section boom features 6 synchronized telescopic sections and a redundant wire rope system, ensuring safe operation even if the main wire rope fails. The 360° infinite rotation platform, with a rated load of 200 kg, provides a spacious working area of 1600mm x 700mm x 1100mm, including a small load-carrying platform for tools and equipment.

Introduction:The vehicle features a 9-section boom with 8 synchronized telescopic sections, providing exceptional reach and flexibility. A key safety feature is the redundant wire rope system, which ensures safe operation even if the primary wire rope fails. The 360° infinite rotation platform offers a spacious working area of 1600mm x 700mm x 1100mm, including a small platform for carrying tools and equipment.

Introduction:It is made of high-strength and high-toughness manganese steel BS700 plate, and styled with a 7.2-meter by 5-section U-shaped veneer jib.Double hooks and double winches, special hydraulic winches for construction vehicles.1.3m external gear turntable, medium planetary gearbox, center slewing radio slewing structure.High-strength composite leg box steel using 70 manganese steel, do the side H-type outrigger molding with the rear outrigger, 4-sided attachment plate.The use of multi-way valve single linkage, the extractor to take the force, aluminum material forced air-cooled heat di

Introduction:The GK30 aerial work platform is equipped with a 7-section arm that can extend up to 28.3 meters in height and offers a 360° platform rotation for flexible maneuvering. The platform's foldable design and spacious 2000 x 700 mm dimensions allow for easy access and comfort at height.The vehicle is also equipped with an advanced electronic control system, a wireless remote control, and a hydraulic system with an emergency power source, ensuring safety and reliability during operations.

Introduction：The 7-section telescopic boom, featuring 6 synchronized extending sections, ensures precise and efficient reach. Designed with steel wire rope backup support, the boom prioritizes safety—ensuring that even in the rare event of a primary wire rope failure, personnel can still descend safely. The 360° infinitely rotating work platform, rated for 200 kg, further enhances operational flexibility.Stability is a key feature of the GK30MAX, thanks to its X-shaped hydraulic outriggers, which are individually adjustable and extend to 5400mm x 5650mm.

Introduction:The system is equipped with a 9-section telescopic boom that offers 8 synchronized extending sections and full 360° rotation, greatly enhancing its reach and maneuverability. The work deck measures 3200 mm × 1000 mm × 1100 mm and supports a load of up to 300 kg, with unlimited 360° rotation to provide maximum operational flexibility.For stability, the GK45 features X-type hydraulic outriggers with four independently adjustable three-section legs.

Introduction:The vehicle's 9-section telescopic boom, featuring 8 synchronized extending sections, provides exceptional reach and flexibility. The steel wire rope backup system guarantees enhanced safety, allowing personnel to be lowered smoothly even in the unlikely event of a primary rope failure. The 360° infinitely rotating platform, with a 200 kg load capacity, offers superior adaptability for a wide range of tasks.Stability is a key priority, with X-shaped hydraulic outriggers featuring four double-section legs, each independently adjustable.

Introduction:The KTC5L5 FAW Truck Crane is a compact, lightweight crane designed for efficient operation in tight spaces and urban environments. With a maximum lifting capacity of 3,000 kg and a 5-meter boom, it provides an impressive 24-meter lifting height. Powered by a 113-horsepower engine and featuring a 360-degree rotating boom, this crane is built for versatility and stability, making it perfect for a variety of lifting and construction tasks.

Introduction:Innovative Design: The first of its kind in the country, featuring a 7-section boom design with 6-section synchronous extension, reaching a maximum working height of 28.3 meters and a working radius of 16 meters, making it suitable for a wide range of high-altitude operations.High-Quality Materials: The vehicle body is made of Baosteel 960 high-strength steel, ensuring the body’s strength while maintaining lightweight, improving overall safety and durability.Dual-section Outriggers: The longitudinal and transverse span of the outriggers is 6000mm/5800mm, offering enhanced stabilit

Introduction:The 20-ton rough terrain crane is a specialized lifting machine designed for heavy-duty operations in challenging and uneven environments. Ideal for construction sites, mining operations, and industrial projects, this crane is built to tackle rugged terrains with ease.Mounted on a robust, four-wheel-drive chassis, the crane delivers exceptional off-road mobility and stability. Its powerful engine and advanced hydraulic system ensure smooth and efficient lifting, even under demanding conditions.

Introduction:The KTC10L5 Shaanxi Wing 6 truck crane is a powerful and versatile machine, featuring a 10,000 kg lifting capacity and a 27-meter maximum lifting height, making it ideal for construction projects, industrial applications, and heavy-duty lifting tasks.

Introduction:The GK45 features a 7-section arm with 6-section synchronized telescoping, allowing for extended reach and flexibility. The platform has a rated load capacity of 450 kg and measures 320010001100 mm, providing ample space for operators and equipment.

Introduction:The ISUZU JUKA GK60 Aerial Work Vehicle is designed for high-altitude tasks with a maximum operation height of 60 meters and a work range of up to 27 meters. Powered by a 205HP Isuzu 4HK1-TCG60 engine and equipped with the ISUZU MLD-6Q transmission, it delivers excellent performance and stability.

Introduction:The 20-ton truck crane is a high-performance lifting machine designed for efficiency and reliability in diverse working conditions. Built on a robust truck chassis, this crane offers exceptional mobility, allowing it to easily transition between job sites while maintaining superior lifting capabilities.Featuring a durable telescopic boom with multiple extension sections, the crane provides impressive reach and lifting height, making it suitable for tasks such as construction, logistics, and maintenance.

Introduction:The GK45 Aerial Work Vehicle is a powerful and versatile high-altitude platform designed for a wide range of demanding outdoor tasks.

Introduction:With a maximum working height of 60 meters and a horizontal reach of up to 27 meters, this vehicle is ideal for handling large-scale aerial operations. The 400kg-rated platform is spacious and equipped with a 360° rotating feature, enhancing its versatility and operational flexibility in tight spaces.The vehicle is equipped with a renowned domestic electronic control system, supporting both wireless remote operation and three-way control for maximum convenience and safety.

Introduction:The 35-meter Aerial Work Vehicle offers exceptional height and versatility, making it perfect for demanding tasks at significant altitudes. It provides a working height of up to 33.3 meters and a maximum working radius of 18 meters, ideal for large-scale construction, maintenance, and installation projects. Powered by the JAC Junling V3 chassis and a 140-horsepower Dewei engine, this vehicle is built for performance and ease of use.

Introduction:The GK35 Aerial Work Vehicle is a specialized high-altitude platform designed for lifting personnel and equipment to elevated work areas.

Introduction:The 45-meter Aerial Work Vehicle is built to tackle demanding tasks at impressive heights. Capable of reaching up to 45 meters with a working range of 25 meters, it’s perfect for projects like high-rise building maintenance, wind turbine servicing, and installing or repairing equipment in elevated locations.This vehicle stands out with its powerful 190-horsepower Cummins engine and a reliable Fast transmission, offering the strength and smooth operation needed for long-term, high-altitude work.